Instruction manual

3. Preparation
3-4
RF-20A/20Axs
6
A memory check is executed.
7
If there is no abnormality, the screen shown to the
right is displayed.
Initial screen in the single wavelength mode
8
The initial screen is displayed.
The operation keys will be displayed and become
operable.
Initial screen in the dual wavelength mode
NOTE
When connected to the system controller, press
after the instrument has started up. This will
display the operation keys and make them operable.
Some operations, such as inputting settings, cannot be
performed.
RF-20A V*.**
CHECKING
RF-20A V*.**
CHECK GOOD
EX200nm EM300nm
Xe 1000.00
EX200nm EM300nm
Xe:ch1 1000.00