Instruction manual

4.1 Measuring in the Single Wavelength Mode
4-3
RF-20A/20Axs
4
4
Press repeatedly until [λ MODE] is
displayed.
5
Enter and press .
This sets the measurement mode to single
wavelength.
Initial screen in the single wavelength mode
6
Press twice.
Setting of the measurement mode ends and you
are returned to the initial screen.
4.1.2 Setting the Measurement Wavelengths
Set the excitation wavelength and emission wavelength.
The setting ranges for the wavelengths are as follows.
1
Press .
The initial screen will be displayed.
2
Press .
[PARAMETER] will be displayed.
MOD E1
1:Single 2:Dual
EX200n m EM30 0nm
X e 1000.00
Wavelength Setting Range (Units: nm)
EX (excitation wavelength) 0, 200 to 900
EM (emission wavelength) 0, 200 to 900
EX200n m EM30 0nm
X e 1000.00
PARAMETER
Enter to Select