Instruction manual

4. Basic Operation

4-24

RF-20A/20Axs

Enter the emission wavelength with the numeric

keys, then press .

This sets the emission wavelength.

Press twice.

Setting of the excitation wavelength and emission

wavelength ends and you are returned to the initial

screen.

NOTE

This instrument has two analog output connectors: analog output connector 1 and analog output connector 2.

Set the analog output connector according to the equipment you are connecting to.

^ "4.2.3 Setting the Analog Output Connectors" P.4-25

Connected Equipment Remark

When connecting a Chromatopac or a

variable range recorder

Set the output mode for the analog output connectors to INTEGRATOR.

When connecting a fixed range recorder

Set the output mode for the analog output connectors to RECORDER, and

set the output range at the instrument.

^ "4.2.4 Setting the Output Ranges" P.4-28