Instruction manual

4.2 Measuring in the Dual Wavelength Mode
4-27
RF-20A/20Axs
4
Analog output connector 1 (RF-20Axs)
Analog output connector 2 (RF-20Axs)
5
Enter the set value from the numeric keys and
press .
This sets the output mode of the analog output
connectors.
∗ Note that [8] is only displayed on the display
panel of the RF-20Axs.
6
Press twice.
Analog output connector output mode setting
ends and you are returned to the initial screen.
∗ To set the output mode of analog output
connector 2 right after having set that of analog
output connector 1, display the screen on which
the output mode of analog output connector 2
can be set by pressing after pressing
in step 5.
ANALOG1 MODE 0
Input 0 - 3,8
ANALOG2 MODE 0
Input 0 - 3,8