Instruction manual

Safety Instructions
VII
RF-20A/20Axs
!WARNING
• Do not place heavy objects on the power cord, and keep
any hot items away.
The cord could be damaged, resulting in fire, electrical shock or
malfunction.
If the cord becomes damaged, contact your Shimadzu
representative immediately.
• Do not modify the cord in any way. Do not bend it
excessively or pull on it.
The cord could be damaged, resulting in fire, electrical shock or
malfunction.
If the cord becomes damaged, contact your Shimadzu
representative immediately.
!CAUTION
• When installing the instrument, be careful not to pinch
your fingers between the system components, as this
could result in injury.
• When opening the doors, be careful not to pinch your
fingers as this could result in injury.
• Fit the Xenon lamp before turning the power switch ON.
The instrument is delivered with the Xenon lamp removed.
• When turning the power switch ON, be sure to check that
the Xenon lamp is fitted.
When the Xenon lamp is turned on, a high voltage of around 30 kV
is applied to the terminal of the lamp. If the lamp is not fitted
correctly at the time of ignition, the instrument may be damaged.
^ "9.1.9 Fitting the Xenon Lamp" P.9-33