Instruction manual

94
Percentage Weighing

8
APPLICATION FUNCTION MODE
When setting the reference as a percentage of your choice…
3
Select the specic percentage
reference.
[OPTION] [SET]
(Check the indication.)
The indication differs depending on whether a
reference value has already been set or not.
When no percentage reference value has been set
[---]
When a percentage reference value has already been set
(The percentage reference value is displayed.)
To update the percentage reference value, proceed to step 4.
If you are not updating the percentage reference value, the following steps are not necessary.
^ "Weighing Percentages", page 95
•
•
4
Enter a percentage value of your
choice.
[OPT REF]
(Enter the percentage value.)
^
"Entering Numerical Values", page 49
5
Place the container on the pan and
press
The balance will be tared.
6
Place the sample that is to
provide the reference weight in the
container.
7
Check that (the stability mark)
lights up, then conrm.
[SET]
A percentage value calculated by conversion on
the basis that the reference weight is equal to the
set percentage is displayed.
Percentage weighing is now possible.
^
"Weighing Percentages", page 95
!O!P!T!I!O!N
! !S!E!T!
!O!P!T!I!O!N
! !S!E!T!
O!P!T! !R!E!F
! ! !5!0.0!0
O!P!T! !R!E!F
/
/
/
/
/
/
/
/
/
/
/
/
/
/
O!P!T! !R!E!F
! ! !5!0.0!0
O!P!T! !R!E!F
/
/
/
/
/
/
/
/
/
/
/
/
/
/
! !S!E!T!
! ! !5!0.0!0
The specic percentage weighing symbol lights
up.
! !S!E!T!
! ! !5!0.0!0
The specic percentage weighing symbol lights
up.