Instructions / Assembly

Reassembly

Carry out the removal procedure in reverse.

Note:

•

Apply grease to the plate axle.

•

When reassembling, insert the end of the plate tension spring into the groove in the plate.

Plate tension

spring

DO NOT apply grease.

If the outer surface of the

roller clutch with non

groove part gets grease on

it, it will slip and the friction

function will not work.

Apply grease.

•

Grease number:

DURA-ACE grease

(Y04110000)

Plate axle

•

Set the cam unit as shown in the illustration.

Set with the

projection facing

down.

Set with the uneven side

to the right.



Friction adjustment (RD-M986)

The friction amount can be adjusted as desired.

Furthermore, you can also adjust after a change of the friction occurs during use.

Set the lever switch to OFF.

Using a 2 mm Allen key, remove the plate unit cover.

Lever switch

Plate unit cover