Instructions / Assembly

While pressing the friction unit with your finger, set the lever switch to the OFF position. At that time, make sure that the

friction unit is in contact with the bottom of the plate unit.

OFF

Note:

Do not install the plate unit cover with the switch base floating off the bottom of the plate unit. Sufficient sealing

performance will not be obtained, which will cause rust to appear in the inner mechanism, potentially resulting in the adhesion

of the plate.

OK Not OK

Install the plate unit cover.

Plate unit cover

2 mm Allen key

Tightening torque:

1.0 - 1.5 N·m {9 - 13 in. lbs.}