Instructions / Assembly

7
 Replacing with direct mount type
1. If there is an E-ring attached, use a flat-head screwdriver to remove it.
2. Using a 5 mm Allen key, remove the bracket axle.
• If there is a spacer, remove it.
• The E-ring is not necessary for installation.
E-ring
5 mm Allen key
1
2
Bracket
Spacer
Tightening torque:
8.0 - 10.0 N·m {70 - 87 in. lbs.}
When replacing the direct mount type with the bracket-equipped type, reverse the procedure.
• For models with a spacer, insert the spacer into the correct position.