User Manual

3-43
 Select “TCP/IP Settings”. In the “General” tab, ensure “Use
Server-assigned IP address” is selected. In the “Name
Servers” tab, ensure “Use Server-assigned addresses” is
selected, and select “OK”. If you are unable to connect with
these default settings, see your ISP or network administrator
for specific TCP/IP information.
 Select the “Next” button and type the telephone number.
 Select the “Finish” button.
The connection you just created appears as an icon in the “Network
and Dial-up Connections” folder.
 Set up a point-to-Point Protocol(PPP) account with an ISP and
obtain the following information:
 Access telephone number
 User name
 Password
Once you have established an account, create a new connection on
your device. When creating this connection, you should be able to use
all of the default TCP/IP settings provided in the Make New
Connection Wizard. If you can’t connect using the default settings,
contact your ISP or access your ISP’s Web site for specific TCP/IP
information as well as primary and secondary DNS address.
 Modify connection setting
 Select Start > Settings > Network and Dialup Connections
 Select the icon for connection settings you want to modify.
 Select File > Properties, or double- tap the appropriate icon.
 Select desired options. There may be additional settings that
depend on the connection. To modify, select the icon and
select the icon and select Advanced Settings… from the
menu.