User Manual

3-54
Figure 3-86 Stylus Properties Figure 3-87 Stylus Properties
3.2.21 System
Table 3-43 System
ICON ITEM & FUNCTION
z “General” Tab : (Figure 3-88)
9 To show:
¾
Firmware information
¾
Information about Processor type, Memory size, Expansion
card
z “Memory”: (Figure 3-89)
9 Move the slider to adjust memory allocation. Default storage
memory is normally is normally set to about 8MB with the
reminder assigned to Program memory.
9
Press the “OK” key on the Keypad.
Note: the difference is occupied by OS between the RAM size in
Information properties and total memory size of storage memory
and program memory
z “Device Name” Tab : (Figure 3-90)
9 Your device uses this information to identify itself to other
computers.
9
The input panel will open to facilitate data entry.