User Manual

5-1
Chapter 5. Software Applications
5.1 Introduction
The PDT includes Calculator, Inbox,…..
You can switch to any software program by tapping the Start Menu.
5.2 Software Applications
5.2.1 Inbox
Use Inbox to send and receive e-mail messages in the following ways:
9 Synchronize e-mail messages with Microsoft Exchange or Outlook on the
Host Computer.
9
Send and receive e-mail messages by connecting directly to an e-mail server
through an Internet server provider (ISP) or a network.
To setup “Inbox”:
9 Select Start> Programs> Inbox to open it.
9
Select Service> Options from the command bar. Drag the dialog to show the
right edge to configure e-mail.
9
Select “Add…” (Note 1)
9
In the “Service Type” list, select POP3 Mail or IMAP4 Mail. (POP3 is the
most common mail protocol for ISPs).Enter a unique name for e-mail service
in the “Service name” field. This name cannot be changed later.
9
Select “OK”.
9
The Mail Service Setup wizard appears after you add a service. If you are
adjusting the setting of an existing service, select Service> Options, select the
service you are using, and then Properties. In the Service Definition dialog
box, complete the following entries as needed:
¾
Connection: Select the name of the connection you created to connect to
the mail server. If you are receiving e-mail through a network(Ethernet)
connection, select Network Connection. If you want Inbox to use your
current connection, select (none). If you have not created a connection,
select Create new connection. Double-tap the “Make new Connection”