User Manual

1-9
country dependent and are firmware programmed at the factory to match the intended
destination. The firmware setting is not accessible by the end user.
Caution: SCC declares that SC800 ( FCC ID: TQ2-SC800PDT-BW ) / SC820
( FCC ID: TQ2-SC800PDT-BW ) is limited in CH1~CH11 for 2.4GHz by
specified firmware controlled in U.S.A.
The FCC ID of SC800/SC820 is TQ2-SC800PDT-BW
LED AND LASER SAFETY INFORMATION
z Class II LED/Laser Product
z Do not stare at the LED/Laser or shine into eyes
z Do not allow young children to use the product without adult supervision
z Do not replace/repair the LED/Laser, these are not user replaceable
z Do not shine the LED/Laser on a shiny reflective surface
z LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER
PRODUCT
1.6 Recycling & disposal instructions.
Do not throw this product in the home waste bin. For proper end-of-life
treatment consult the
Environmental care section of ftp://ftp.sccltd.com.tw/
1.7 Regulatory information.
For CE, FCC, RoHS and other Document of Conformities, consult the
Regulatory section of ftp://ftp.sccltd.com.tw