User Manual

2-25
until you tap the Stop Ping button, move to an SCU window other than Diags or Status,
exit SCU, or remove the radio.
z Diagnostics: Attempt to (re)connect to an AP, and provide a more thorough dump of
data than is obtained with (Re)connect. The dump will include radio state, profile
settings, global settings, and a BSSID list of APs in the area.
z Save To...: Save the diagnostics output to a file.
Global Tab
Global settings include:
z Radio and security settings that apply to all profiles
z Settings that apply to SCU itself
An administrator can define and change most global settings on the Global Settings Tab in
SCU.
The default setting for each global setting ensures reliable operation in most environments.
Consult the user’s guide for details on all global settings.
2.5.7 Reading barcodes, 1D laser version.
To use the scanning function, complete the following steps:
1. If you have not already done so, remove the protective plastic film before using
devices equipped with a 1D laser bar code reader.
2.
Select Start > Setting > Control Panel > Barcode Setting; complete all