User Manual

3-49
9 The Scheme Tab allows you to determine the time to switch
state to Suspend mode when using either Battery Power or AC
Power.
9
Select Battery Power or AC Power as the power scheme from
the pull-down list.( Figure 3-78)
9 Select the time to suspend mode from the pull-down list.
( Figure 3-79)
z “Device Status” Tab: ( Figure 3-80)
Provide power level of device – The power level ranges from
“ High(D0)” which means the device is at the highest power level to
“Off(D4)” which means the device is at the lowest power level.
Note:
This ICON inside the Task Bar shows that AC adapter provides power
to the PDT
The ICON inside the Task Bar shows that Main Batteries provides the
power to the PDT.
The ICON inside the Task Bar shows that AC adapter provides the
power to the PDT and is charging the main batteries..
Figure 3-77 Power Figure 3-78 Power