User's Manual

2-6 / 121
◆ When charging the battery pack, the charge LED indicator on the Device
turns on Red.
◆ After the battery pack is fully charged, the charge LED indicator turns to
Green.
CAUTION: Please do not remove the Battery pack too long from Device after
you have already full-charged the Battery pack and backup battery pack and
start to use the Device. Otherwise non-saved data will be lost. Please also
keep in mind power the Device off if you want to change the main Battery pack.
2.4. Handling the Device
2.4.1 Starting the Device
Press the Power key to turn on/off the Device. If the Device does not power on,
perform a cold boot. See 2-7 Resetting the Device.
CAUTION: When a battery is fully inserted in Device for the first time,
upon the Device first power up, the device boots and powers on
automatically.
Figure 2-8 Starting the Device
When the Device is powered on for the first
time, it initializes its system. A splash
screen (figure 2-8) appears for a short
period of time followed by the WinCE 6.0
window.
This section offers the basic procedures of
Device using.