User's Manual

2-27 / 121
“Schemes Tab”) Suspend mode works and looks just like you have turned the
unit off. Press the key to suspend the Device, Press the key
again for the Device to resume its Previous state.
Use the Battery power control panel to set the duration to switch state to
Suspend mode when system using battery power. This will save battery power
when Device is not in use.
Figure 2-20 Schemes Tab-Idle Figure 2-21 Schemes Tab-Suspend
Suspending:
The following conditions will suspend:
z Press <Power> key while the Device is on.
z
The duration timer of item “Switch state to Suspend” expires, which
indicates that there has been no use for a specified of time.
z
The battery pack is completely discharged.
2.6.2 Resuming
Use one of following methods to resume (wake up the Device):
z Press <Power> key to suspend or resume (wake up).
When a battery pack completely discharges while the unit is in suspend mode,
the Device remains suspended until discharged battery condition is corrected.