User's Manual

3-27 / 121
3.2.6 Device Information
Provide Firmware version, Software version, Configuration No, Serial No,
Flash ROM size, RAM size, WIFI MAC address, and Bluetooth ID
Figure 3-50 Device Information
3.2.7 Dialing Properties
Table 3-26 Dialing properties
ICON ITEM & FUNCTION
z “Dialing Properties” Tab: (Figure 3-51)
9 In the When dialing from list, select the “Location” where
you want to change settings.(Figure 3-52)
9
To create a new location, select “New”. Enter the name of
the location, and then select “OK”.(Figure 3-53)
9
Enter or edit the area code and local country code as
needed.
9
In Dial using, select “Tone dialing” or “Pulse dialing”.
Most phone lines are tone.
9
To automatically disable call waiting, select “□ Disable call
waiting by dialing”, select the appropriate number
sequence in the list, or enter a new sequence.
z Editing dialing patterns: (Figure 3-54)
9 Using the codes listed in the topic; revise the dialing
patterns as needed.