User's Manual

3-50 / 121
Figure 3-114 Stylus Properties Figure 3-115 Stylus Properties
3.2.21 System
Table 3-40 System
ICON ITEM & FUNCTION
z “General” Tab: (Figure 3-116)
9 To show:
¾
Firmware information
¾
Information about Processor type, Memory size,
Expansion card
z “Memory”: (Figure 3-117)
9 Move the slider to adjust memory allocation. Default
storage memory is normally is normally set to about 8MB
with the reminder assigned to Program memory.
9
Press the “OK” key on the Keypad.
Note: the difference is occupied by OS between the RAM
size in Information properties and total memory size of
storage memory and program memory
z “Device Name” Tab: (Figure 3-118)
9 Your device uses this information to identify itself to other
computers.
9
The input panel will open to facilitate data entry.
9
To close the Device Name, press the “OK” button, or press
the <Enter> key on keypad.