User's Manual

2-26 / 122
Figure 2-19 Detach the battery cover from Device
2. Detach MicroSD Holder and Insert the MicroSD Card into the MicroSD
compartment.
Figure 2-20 Detach the SD Holder from Device
2.5.9 Help
To tap “?” can get help information for each program.
2.6 Power management
2.6.1 Suspend Mode
The Device will go into a suspend mode when it is idle for a period of time. The
idle duration can be customized using the Power control panel (refer to Figure
“Schemes Tab”) Suspend mode works and looks just like you have turned the
unit off. Press the key to suspend the Device, Press the key
again for the Device to resume its Previous state.
Use the Battery power control panel to set the duration to switch state to
Suspend mode when system using battery power. This will save battery power
when Device is not in use.
1
2
4
3
1
3
2