User's Manual

3-17 / 122
3.2.1.5 “Others” Tab:
Figure 3-21 Others Tab Figure 3-22 Set to Factory Default
Figure 3-23 Barcode Firmware Version
Table 3-20 Caption Description
Button Caption Description
Factory Default
To set all Barcode parameters to factory default
Firmware Version
To get firmware version from Barcode engine
3.2.1.6 Barcode Setup
A. Tap “X” on top right site, to reset all configuration setting of this barcode
into default values, and without Saving.
B. Tap “OK” on top right site, to be decided setting of this barcode. and Save
the Settings.