User's Manual

3-20 / 122
3.2.3 Bluetooth Device Properties
Note: Here are two ways to use Bluetooth Device.
1. Tap “Start” > “Programs” > “Bluetooth” > “Bluetooth Manager”.
2. Tap “Start” > “Settings” > “Control Panel” > “Bluetooth Device
Properties”.
Table 3-22 Bluetooth Device Properties
ICON ITEM & FUNCTION
z “BT Service” Tab: (Figure 3-30)
9 Tap “Bluetooth Device Properties” to enable Bluetooth
device(Figure 3-30).
9 Wait for 10 seconds in order to initialize the Bluetooth
hardware correctly.
9 Tap the “Scan Device” button to initiate a scan for
Bluetooth hardware. The Bluetooth manager lists the
Bluetooth devices that it finds, see Figure 3-33. If
Bluetooth hardware is not found the Bluetooth Hardware
Error window appears, see Figure 3-34. Table 3-23
described the Bluetooth Icons.
9 Double tap the device to connect to on the device list. The
Bluetooth Manager Authentication window appears. Tap
No to connect to the device without authentication, or tap
Yes to authenticate the device before connecting. (Figure
3-35)
9 If the Yes button was selected in the Bluetooth Manager
Authentication window, the enter PIN windows appears.
Enter a PIN (between 1 and 16 characters) in the Enter
PIN: text box, and tap OK. The mobile computer sends the
PIN request to the device for bonding. (Figure 3-36)
9 When prompted, the same PIN must be entered on the
other device. When the PIN is entered correctly on the
other device, the bonded icon appears on the device list.
(Figure 3-37)
z “Serial Port” Tab: (Figure 3-38)
9 Tap “Start” > “Programs” > “Bluetooth” > “Bluetooth SPP
Manager” and Tap “Scan Device”
9 Wait for 10 seconds in order to initialize the Bluetooth
hardware correctly
9 Select which device you want to use