User's Manual

• If the screen do not respond to touches made on it or the touches are off-

point, the touch screen is needed to be calibrated to set the touch points

properly.

1. Tap Start > Settings > System > Screen.

2. Set/configure the touch points in the General Tab.

3. Tap on the Align Screen button to start calibrating the touch points.

4. Using the stylus pen, tap the target ( ) firmly and accurately at each

location on the screen. The target will continue to move until the screen is

aligned. When the target disappears, tap the screen once to complete the

calibration process.

5. When you are done, tap on the OK button to accept/save the changes

made on the window.

Screen

Ⅳ

-4