User's Manual
Table Of Contents
- STM-7100 User Manual_SHC_rev.01
- ActiveSync 28T------------------------------------------------------------------------------------------------------- 45
- Reset 28T-------------------------------------------------------------------------------------------------------------- 46
- Fundamental Problems 28T--------------------------------------------------------------------------------------- 46
- Appendix A. Additional Information28T------------------------------------------------------------------------- 49
- Usage and maintenance 28T------------------------------------------------------------------------------------- 49
- Device Handling 28T------------------------------------------------------------------------------------------------ 49
- Specification28T------------------------------------------------------------------------------------------------------ 50
- When you turn on the unit, basic screen will be displayed.
- Functions of Icons in the basic screen are explained as bellows.
- You need to install the ActiveSync program for connecting this unit to the Computers.
- Please refer the “Connect to the PC” pages for installation and how to use of ActiveSync.
- From the Start menu, run Internet Connector to connect with network through WLAN. Then you can use internet explorer to browse the internet.
- You can turn On/Off the WLAN
- 1) Backup/ Restore files with ActiveSync
- 2) Program installation with ActiveSync
- Memory
- You can use two kinds of memory for IMP-600(Built-in RAM and Micro SD Card).
- ActiveSync 28T------------------------------------------------------------ 45
- Reset 28T----------------------------------------- 46
- Fundamental Problems 28T-------------------------------------------------------- 46
- Appendix A. Additional Information28T------------------------------------------------ 49
- Usage and maintenance 28T------------------------------------------------------ 49
- Additional information
- FCC warning-15c
1) Backup/ Restore files with ActiveSync
You can back up or restore files, Data base, PIMS information and programs on the RAM to the PC.
It can run automatically or manually.
▷ Backup
1) Connect the unit to the PC
2) If you select the Backup/Restore under Tool menu on the Activesync scree.
3) Select ‘Full Backup’ or ‘Incremental Backup.
4) Select the Backup now button, and you can see the following screen.
Notice: Don’t remove the USB cable or run other process during Backup process.
▷ Restore
Notice: Before the Restore work, please Backup or move the new generated backup files and programs to
the PC or Micro SD card.
① Connect the unit to the PC
② Close every programs that are running on the unit
③ Select the Backup/ Restore under Tool menu on ActiveSync screen and the Restore tab.
④ Select Restore button
⑤ Once restore finished, push the reset button on the unit with Stylus.
2) Program installation with ActiveSync
▷ Setup.exe or Install.exe
① Download the programs or insert the program CD to the PC.
- 24 -