User's Manual
Table Of Contents
- STM-7100 User Manual_SHC_rev.01
- ActiveSync 28T------------------------------------------------------------------------------------------------------- 45
- Reset 28T-------------------------------------------------------------------------------------------------------------- 46
- Fundamental Problems 28T--------------------------------------------------------------------------------------- 46
- Appendix A. Additional Information28T------------------------------------------------------------------------- 49
- Usage and maintenance 28T------------------------------------------------------------------------------------- 49
- Device Handling 28T------------------------------------------------------------------------------------------------ 49
- Specification28T------------------------------------------------------------------------------------------------------ 50
- When you turn on the unit, basic screen will be displayed.
- Functions of Icons in the basic screen are explained as bellows.
- You need to install the ActiveSync program for connecting this unit to the Computers.
- Please refer the “Connect to the PC” pages for installation and how to use of ActiveSync.
- From the Start menu, run Internet Connector to connect with network through WLAN. Then you can use internet explorer to browse the internet.
- You can turn On/Off the WLAN
- 1) Backup/ Restore files with ActiveSync
- 2) Program installation with ActiveSync
- Memory
- You can use two kinds of memory for IMP-600(Built-in RAM and Micro SD Card).
- ActiveSync 28T------------------------------------------------------------ 45
- Reset 28T----------------------------------------- 46
- Fundamental Problems 28T-------------------------------------------------------- 46
- Appendix A. Additional Information28T------------------------------------------------ 49
- Usage and maintenance 28T------------------------------------------------------ 49
- Additional information
- FCC warning-15c
Troubleshooting
Check the following guide for the possible cause of a problem and how to correct it.
For more detail or other problems, visit our website (
www.wjst.co.kr)
ActiveSync
Check following guide for problems when the device is connecting to PC.
Other problems concerning update issues see Help of ActiveSync on your PC or visit Microsoft mobile
device web site
www.microsoft.com/windows/embedded/ce.net/
• Check whether it is installed actual ActiveSync version on your PC
• Check the power is on
• Check the device is connected to PC with a USB cable in USB port
• Set USB connection as following.
Microsoft ActiveSync > File > Connection Setting > select ‘Allow USB connection with this desktop
computer’
• Reset the device before mount on the Cradle
• Do not mount on the Cradle before PC is restarted
• Connect only one device to PC
Reset
Reset is equal ‘Restart’ of a computer. Carry out when pressing a button or tapping the screen does not
respond. When your device is reset, all data that was not stored during operation will be deleted. Stored
- 45 -