User`s guide

112
Appendix D: Technical data about recording modes and sound qualities
1. Recording mode settings
Each recording mode has predetermined settings for the following 4 parameters:
•Auto section setting; PLEXTALK can be set to automatically create a new section, in
a DAISY recording, after a specified amount of time with no audio input, for example
2 seconds. Use the setting "off" to create a continuous recording with no new sections.
•Time to auto stop recording when no sound; This is the amount of time that
PLEXTALK will continue to record with no audio input. After this time, recording stops
automatically.
•Trigger of starting recording; Recording can be set to start either when you press the
Record Key or when input audio is detected.
•Background noise level of input sound; If you are recording in a low noise
environment, such as a studio, use the "low" setting. If your recording environment is
noisy, such as a conference or lecture, use the "High" setting.
2. Settings for preset recording modes
The preset parameters for the 5 recording modes are as follows:
Default mode:
•Select auto section setting: Off
•Select time to auto stop recording when no sound: Off
•Select trigger of starting recording: When record key is pressed.
•Select background noise level of input sound: Normal (-28dB)
Conference mode:
•Select auto section setting: Off
•Select time to auto stop recording when no sound: Off
•Select trigger of starting recording: When record key is pressed.
•Select background noise level of input sound: High (-20 dB)
Audio mode:
•Select auto section setting: 2 seconds
•Select time to auto stop recording when no sound: 1 minute
•Select trigger of starting recording: When record key is pressed.
•Select background noise level of input sound: Low (-40 dB)