User`s guide

•Turn off the power.

•Hold the SD card so that the cut off corner may be located at the front right corner.

In other words, the cut off corner should be nearest to the bottom of the unit.

•Insert the SD card into the card slot on the left edge of the unit.

•Press the card all the way into the slot ensuring that it engages properly, with the

outer edge flush with the body of the PLEXTALK. Do not use excessive force when

doing so.

To eject the SD card, do the following:

•Turn off the power.

•Push the SD card inwards and then release it. The card should pop out leaving the

outside edge of the card protruding.

•Carefully grip the card and pull it out of the slot.

CAUTION: The PLEXTALK's SD card slot is only compatible with SD or SDHC cards.

Inserting other memory card such as a Memory Stick or Multi Media Card, will cause a

malfunction and should not be used.

Note: SD cards have a locking switch which enables you to protect your data if you want.

This is located on the left side of the card away from the cut off corner. If the switch is

towards the leading edge of the card, you will be able to record and delete titles. If the

switch is away from the leading edge, your data will be protected.