User`s guide

64
•Press the Title key once.
•PLEXTALK will either say, "Level monitor on" or "Level monitor off".
•Each press of the Title key will toggle between these two settings.
Note: If the guidance during recording is turned off, PLEXTALK will not announce your
key presses during recording. If you require this facility, you are advised to use
headphones and turn on the guidance to avoid the level monitor being picked up in the
recording.
12.13. Turning the recording monitor on and off
PLEXTALK enables you to monitor any recording as it is being made, so you can gauge
how the recording will sound in the end. You can turn the recording monitor on or off in
recording stand by, recording pause or during recording. This is done as follows:
•Connect a set of stereo headphones to the headphone socket on the top edge of
PLEXTALK.
•Press the Bookmark key once to turn the recording monitor off.
•Press the Bookmark key again to turn the recording monitor on.
Note: You do not require headphones when recording from a line in source.
Note: For all recordings, PLEXTALK will automatically turn on the recording monitor by
default.
12.14. Getting recording information
You can get information about the current status of the recording by pressing the Number
5 key.
Note: If voice guidance during recording is set to "Guidance off", you will not hear any of
the above information during recording. You will still hear the information in the recording
stand by and recording pause states.