User`s guide

•Use the Left or Right key to go to "Save network settings" and press the Enter key.

•PLEXTALK will ask you to confirm saving the setting file or not. Press the Enter key

to proceed. The file is saved to the root of the SD card or USB device. To cancel,

press the Cancel key.

Note: If both SD card and USB device are connected, the setting file is saved to the root of

the SD card.

18.3.4. Adding wireless network setting

To add the wireless network setting, do the following:

•Press the Menu key.

•Use the Left or Right key to go to "Network settings" option and press the Enter key.

•Use the Left or Right key to go to "Wireless network settings" option and press the

Enter key.

•Use the Left or Right key to go to "Add wireless network setting" option and press

the Enter key.

•Enter the SSID with Numeric keys. After you have finished, press the Down key to

confirm.

•Select "Security mode". Steps for setting are the same as "Available wireless

network". Refer to the section 18.1.2. "Confirm available wireless network and

connect".

•After all settings are completed, the added wireless network is registered as the

highest priority network. Then the menu is closed and PLEXTALK will try to connect

to the added network.

18.3.5. Change or delete wireless network setting

Following three options are available in this menu.

•Change the priority and automatic connection settings

•Change wireless network setting

•Delete wireless network setting

To change or delete wireless network setting, do the following:

•Press the Menu key.

•Use the Left or Right key to go to "Network settings" option and press the Enter key.

•Use the Left or Right key to go to "Wireless network settings" option and press the

Enter key.