User Manual

You can change Device Name to one of your choosing (No space between characters
- maximum 15 characters) then click Apply
If you go to My Network Places you will see the Device Name has been changed
The Network Time Protocol (NTP) function allows the Plextor StorX to update Date
and Time automatically. This function is enabled by default, and you should select
the Time Zone for your area.
Select your time zone from the drop down menu, and then click Apply (this may take
a second to update). You will see that the Date and Time have changed to coincide
with your area. If you uncheck NTP, you can set Date and Time manually.
19 of 47
NOTE: The NTP Server (time.windows.com) may occasionally be out of
sync due to Daylight Saving Time (DST). Please ensure you check date &
time after a restart or before you start a backup.