Model No. SPF1-10C OWNER’S MANUAL Read and save these instructions.
TABLE OF CONTENTS Safety Information & Warnings ........................................................................... 3 Setting up your portable conditioner................................................................... 6 Product features....................................................................................................7 Installing your air conditioner ...............................................................................8 Using your air conditioner............. ......
SAFETY INFORMATION & WARNINGS SAFETY PRECAUTIONS Please read the Manual carefully before operating the machine: 1. Read and keep these instructions. 2. Heed all warnings. 3. Follow all instructions. 4. Do not use this machine near water. 5. Clean it only with a damp cloth. 6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 7.
16.Turn off the machine before unplugging it. 17.Refer all servicing to qualified service personnel. Servicing is required when the machine has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the machine, the machine has been exposed to rain or moisture, does not operate normally, or has been dropped. 18.
ELECTRICAL SAFETY RESET button TEST button Integrated circuit breaker For additional safety, the power cord on this air conditioner features an integrated circuit breaker. You can test and reset the circuit breaker using the buttons provided on the plug case. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if doubt exists as to whether the air conditioner is properly grounded.
SETTING UP YOUR PORTABLE AIR CONDITIONER Before using your portable air conditioner • Remove and store (optional) packing materials for reuse. • Remove any shipping tape before using the air conditioner. • Remove tape residue with liquid dish soap and a damp cloth. Do not use sharp tools, alcohol, thinners, or abrasive cleaners to remove adhesive, which could damage the finish. 20 in. (50 cm) 20 in.
PRODUCT FEATURES 1. 2. 3. 4. 5. Carrying Handle Control Panel Adjustable Front Grille Casters Exhaust Output 6. 7. 8. 9. 10.
INSTALLING YOUR AIR CONDITIONER 1.Screw the exhaust hose to the exhaust outlet on the back of your air conditioner, then screw the hose adapter to the other end of the hose. 2.Measure the window size. OR 3.Install the window sealing plate in the window opening,adjusting the length to fit the window opening and securing it with "Clip" (provided). Note: The window sealing kit works with sliding windows.
Usually Portable air conditioner needs to be equipped with sliding windows. We put two sealing plates in the packaging box of the machine, and the size range after connection is 94cm-127.5cm (37in-50.20in). We also have two spare parts, one short (40cm=15.75in) and one long (67.5cm=26.57in) with "Clip". 15.75in 霆 26.57in If your window size is small, just between 67.5cm-98cm (26.57in-38.58in), you can buy a piece of short board (40cm=15.
4 Small gap Insert Slide (Optional) Note
Caution: The exhaust duct is designed especially for this air conditioner. Replacing or lengthening the duct could result in damage to your unit.
USING YOUR AIR CONDITIONER Inserting the batteries in the remote control • Insert two AAA batteries (provided) into the remote control. Make sure that you orient the batteries correctly (+ and –) when you install them.
1. Power button Press this button to turn the unit on and off. 2. Mode button Press this button to cycle between the 3 modes: cool (full A\C cooling with temperature setting), fan (just fan operation without any temperature setting) and dry (fan operation plus dehumidification). In dry mode, water will collect inside the unit, and must be drained by removing the plug from the middle of the back of the unit. If the tank is full, “FL” will appear on the display to indicate that it needs to be drained.
CLEANING & MAINTENANCE DRAINING THE WATER TANK This unit is equipped with an automatic water vaporization system. The condenser is cooled through the circulation of condensing water to improve cooling efficiency and energy conservation. If the tank is full, “FL” will appear on the display to indicate that it needs to be drained. Turn off the unit, remove the drain plug on the middle of the back of the unit, and drain the tank until empty. Replace the plug and turn the unit back on to resume use.
DUST FILTER • Once every two weeks, remove the dust filter from the back of the unit and wash it. Neglecting to clean the dust filter may cause the unit to run poorly over time. SEASONAL CLEANING If you are planning on putting the unit away long-term: • Pull the drain plug to drain any water left in the tank. • Run fan mode for 2 hours to help dry any collected moisture within the unit. • Turn off the unit and unplug it. • Wash and replace the dust filter. • Take apart the exhaust duct.
TROUBLE SHOOTING In case of any of the following problems, please contact our customer . . . . . . . . . . . . Notice: For any issues not listed here that arise while using the A/C, turn the unit off and unplug it, wait a few minutes, and try again. If problems persist, contact customer service. ERROR CODE CODE DESCRIPTION FL The internal water tank is full and needs to be emptied. E1 Coil temperature sensor error.
LIMITED MANUFACTURER’S WARRANTY Warranty : We provide one-year warranty. For technical support and warranty service, please email service@shinco.com. Warranty Exclusions: The warranty will not apply if the damage is caused by any of the following: • • • • • • • • • Power failure. Damage when moving the appliance. Improper power supply such as low voltage, defective household wiring or inadequate fuses.
