Instruction manual

9
To cancel time setting press the TIMER button. Nothing will be displayed
on the LCD screen.
One hour setting Press the 1HR button, the one hour setting function is on
(the unit stops after running for 1 hour). To cancel press the 1HR button again.
Note: the values used to display time are from 00:00 to 23:59.
3-4 Cooling•Heating•Dehumidy mode
Press ON/OFF button.
Press MODE button, and choose “Cooling”, “Heating” or “Dehumidify” mode.
Press the arrows to regulate temperatures between 16 and 30 degrees Celsius.
Press the arrows button once, the temperature changes 1 degree at a time.
Press the SPEED button to adjust the air flow.
Press the DIRECTION button to adjust the wind direction.
Press ON/OFF to close the air conditioner.
Attention: If the unit is closed the LCD screen shows the room temperature. The
green light indicates the unit is in cooling or heating mode. The green light will be
flashing when the outside temperature is very cold.
During heating mode, if the exterior temperature is very cold, it is possible that the air
flow could be less powerful and the unit could make some noise and the internal
ventilator could stop. It is also possible that the exterior unit could stop or that some
vapour could evaporate from it, etc. This phenomenon is normal when exterior
temperature is very cold.
3-5 Ventilator mode
Press ON/OFF.
Press MODE, choose the ventilator mode.
Press SPEED, choose the desired speed.
Press ON/OFF to stop the unit.
Press the ON/OFF button then press MODE button and choose “Drying Clothes” mode.
Press the ON/OFF button to close the air conditioner.
3-6 Drying clothes mode