Instruction manual

11
In heating mode: one hour after activating the SLEEP mode the preset temperature
increases by 2 degrees automatically, and two hours after the preset temperature
increases by another 2 degrees automatically again. This function will assure your
comfort thru the night.
Press SLEEP button again to cancel the sleep function.
3-10 Switching from C
o
to F
0
Press
0
C /
0
F button to switch the display from Celsius to Fahrenheit.
Use this function when the room temperature is uneven. The temperature around the
remote control can be transmitted to the unit to adjust the temperature.
Press SENSOR when the unit is in use in heating or cooling mode and this symbol
will show on the LCD screen.
Press SENSOR again to cancel
.
3-11 Sensor Switching mode
Attention: Always unplug unit before cleaning. Clean the filters every two weeks.
4. Maintenance
Clean with
soft cloth
Cleaning of the remote control Clean the intake vent grill
Clean with a damp cloth and dry.
If necessary use a gentle soap.
Clean with a damp cloth