Instruction manual

To guarantee the unit it must be installed according to the instructions in this manual.

• The air conditioner has to be grounded properly.

• Check the connecting cables and pipes carefully, make sure they are correct

and firm before connecting the power of the air conditioner. The maximum

length of the connecting pipe between the indoor unit and outdoor unit should

be no more than 5 metres (or it will affect the efficiency) .

• After installation, the consumer must operate the air conditioner according to

the instructions in this manual.

Caution: The installation must be performed in accordance with the National/ Re-

gional Wiring Standard or Code by a qualified technician.

Caution: The indoor unit must be installed at least 2.4m(8ft) above floor or ground

level.

Warning: Risk of electric shock can cause injury or death: Disconnect all remote electric

power supplies before servicing. There must be an air-break switch between indoor and

outdoor unit which needs to be installed close to the indoor unit.

Part



Installation Instruction

1. Select the location for installation

1-1 Indoor unit

• Must be placed on a rigid wall with no vibrations.

• No obstacle in front of air intake and outlet vents, the distance between the top

of the unit and the ceiling should be at least 10cm (4 inches).

• Place unit where the cold air can be blown evenly throughout the room.

• The maximum distance between the indoor unit and outdoor unit is 5 metres;

the same distance must be respected for the height.

• Avoid direct sunlight. Exhaust water must be easily drained.

• The air filter must be installed or removed easily (there should be at least 20

cm of free space under the unit).

• The distance between the unit and a television or a radio should be more than

1 metre (because the unit can disturb the images of the television and make

some noise).