Instruction manual

• The unit has to be more than 1 metre away from a fluorescent lamp or other

electric bulbs ( they could interfere with the remote control).

1-2 Outdoor unit

• It should be installed in a well ventilated place that is protected from strong

winds.

• It should not be exposed to direct sunlight and rain.

• It should be installed where the operating noise will not disturb neighbours. It

should be placed on a solid base to avoid vibrations or noise.

• Keep away from flammable gas.

• If the unit is installed on a raised base make sure it is well secured.

2. Installation of Indoor Unit

As the unit is heavy, the wall should have sufficient strength and durability for operation

of the air conditioner, and for prevention of any vibration or noise. If it is weak, reinforce-

ment work should be performed prior to installation.

There should be more than 10cm of space all around while installing the indoor unit.

Tie a thin cord in the hole

More than 10 cm

Installation plate

The level can be obtained easily by aligning the hanging

cord with the stripe of middle holes

Fix screw ST4 X 30

2-1Fix the wall-mounted plate