Operator`s manual

5
65010-94010_MLE230_07LP 11/21/01, 11:19 AM9
Product Description
Using the illustration as a guide,
familiarize yourself with your machine
and its various components. Under-
standing your machine helps ensure
top performance, long service life and
safer operation.
WARNING!
Do not make unauthorized
modications or alterations to this unit
or its components.
A - Outer tube
B - Cutting attachment shield
C - Edger blade
D - Gearcase
A
B
C
D
Specications
Length/Weight/Height 793 x 171 x 299 mm (31.2 x 6.7 x 11.8 in)
Multipurpose Edger Tool (less cutting attachment) 1.98 kg (4.4 lb)
Gearcase Lubrication Lithium based grease
Gear Reduction 1.36:1
Gearcase Arbor Bolt Size 8 mm Left-hand thread
Specications are subject to change without notice.
Before assembling, make sure you
have all the components required for a
complete unit:
Shaft/Gearcase Assembly
■
Shield/Wheel Assembly ■
Edger Blade ■
Operator’s Manual ■
Assembly Tool (s) ■
Carefully inspect all components for
damage.
IMPORTANT!
The terms “left”, “left-hand”, and
“LH”; “right”, “right-hand”, and “RH”;
“front” and “rear” refer to directions as
viewed by the operator during normal
operation.
Prior to assembly