Operator`s manual

16
C242 Brushcutter
Filling the fuel tank
1. Place the unit on a at, level surface.
2. Clear any dirt or other debris from around the fuel ller cap.
3. Remove the fuel cap (A), and ll the fuel tank with clean,
fresh fuel. Do not ll above bottom of fuel tank neck (B).
4. Reinstall the fuel tank cap (A) and tighten rmly.
5. Wipe away any spilled fuel before starting engine.
After use
• DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel
storage container.
Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your
area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied
building, away from sparks and ames.
IMPORTANT!
Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when
a fuel stabilizer is added. Use of unmixed, improperly mixed, or stale fuel may cause hard starting, poor
performance, or severe engine damage and void the product warranty. Read and follow instructions in the
Long Term Storage section of this manual.
Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use.
CAUTION!
Slowly remove the fuel cap only after stopping the engine.
B
A
Fuel
IMPORTANT!
Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic
fuel shut-off containers to reduce fuel spillage.