Operator`s manual

10
Removing the PowerBroom Drum Assemblies
Prior to installing a Tiller/Cultivator
Kit, the PowerBroom drum (if so
equipped) and axle assemblies must
be removed as follows:
1. Use a pair of pliers to remove the
cotter pins from the drum axles.
2. Slide the drum assemblies from the
axles.
3. Remove the hitch pins, and with-
draw the clevis pins from the drum
axles.
4. Slide the drum axles from the
gearcase output shafts.
5. Remove gearcase.
6. Remove optional debris shield if
installed.
CULT04
Gearcase
Output
Shaft
Drum
Assembly
Remove cotter
pins
1
Slide off drum
assemblies
2
Remove hitch pins and
clevis pins
3
Slide off the
drum axles
4
Figure 5
ASSEMBLY