Digital Temperature Gauge 3V Dry Cell Installation Instructions *Please make sure to ground the battery Part #17-842
Using as a WATER TEMPERATURE GAUGE Change the stock thermo-sender to the new PT1/8 Sender. The illustration below is an example, as different motorcycles can have the stock sender installed in different areas. Please check your service manual for clarification. Stock temperature warning light will not work, so be careful of high temperatures.
Using as an OIL TEMPERATURE GAUGE *In order to use the oil temperature gauge capabilities, make sure you have selected and separately purchased the appropriate adapter to fit the plug size you need. Adapter Number 17-852S 17-853S 17-854S 17-855S 17-859S Plug Size 12mm x P1.50 14mm x P1.25 14mm x P1.50 16mm x P1.50 18mm x P1.
Gauge Functions
Sub Display Function
Clock Settings
Troubleshooting 1. The gauge power will not turn on: Please check the brown wire and black wire. Make sure that the voltage is correct, at 12V. 2. When starting the engine or while riding, the clock resets: High voltage parts and HID lights can cause this problem. Wrap aluminum tubing around each wire connecting to the gauge and ground it to the motorcycle. And/Or, the battery may be weak. When the battery is lower than 6V, the clock will stop working. Charge the battery or change. 3.
