Instructions / Assembly

HOW TO ASSEMBLE YOUR
SIDE TABLE
LIST OF PARTS
TOOLS NEEDED : Philips screwdriver, power drill optional
CAUTION: When assembling table, DO NOT completely
tighten the bolts and nuts until all parts & holes are properly aligned.
ENJOY YOUR NEW SIDE TABLE!
Step #1: Attach top panel to side panel using 4 Wood
Screws (3.5 x 35 m/m).
Step #2: Attach the side panel & to side panel using
8 Lag Bolts (6 x 60 m/m) and 8 barrels, inserting the
barrels into the holes found on side panel .
Step #3: Attach the side panel & to bottom panel
using 4 Machine Thread (6 x 45 m/m) and 4 nuts.
4 PCS
Machine
Thread
(6 x 45 m/m)
2 PCS
Wood Screws
(3.5 x 35 m/m)
8 PCS
Barrels
4 PCS
Nuts
8 PCS
Lag Bolts
(6 x 60 m/m)
2 PCS
Lag Bolts
(6 x 60 m/m)
2 PCS Barrels
&
2 PCS Lag Bolts
(6 x 60 m/m)
2 PCS Barrels
&
2 PCS Lag Bolts
(6 x 60 m/m)
2 PCS Barrels
&
2 PCS Lag Bolts
(6 x 60 m/m)
2 PCS
Wood Screws
(3.5 x 35m/m)
1 PC
Machine Thread
(6 x 45 m/m)
& 1 Nut
1 PC
Machine Thread
(6 x 45 m/m)
& 1 Nut
2 PCS
Barrels
TOP PANEL 1PC
I
SIDE PANEL 2PCS
J K
BOTTOM PANEL 1PC
L
SIDE PANEL 2PCS
M
I
M
M
M
J
J
K
K
L
(Rev. 9/2016)
4 PCS
Wood
Screw
(3.5 x 35 m/m)