Instructions / Assembly

PARTS INCLUDED:

How To Assemble Your Bench

TOOLS NEEDED: Philips screwdriver, power drill optional

CAUTION: When assembling bench, DO NOT completely tighten the bolts and nuts

until all the parts & holes are properly aligned.

(REV. 9/2016)

6 PCS

Lag Bolts

(6 x 60 m/m)

6 PCS

Barrels

Right Armrest

Left Armrest

Seat Back

Seat

Step 2:

Attach Left Armrest to Seat Back.

Step 3:

Repeat same on the other side.

Step 1:

Attach Left Armrest to Seat.

PAGE 1
How To Assemble Your Bench (REV. 9/2016) TOOLS NEEDED: Philips screwdriver, power drill optional CAUTION: When assembling bench, DO NOT completely tighten the bolts and nuts until all the parts & holes are properly aligned. PARTS INCLUDED: 6 PCS Lag Bolts (6 x 60 m/m) C Seat Back B Left Armrest D Seat 6 PCS Barrels A Right Armrest Step 1: Attach B Left Armrest to D Seat. B D C Step 2: Attach B Left Armrest to C Seat Back. Step 3: Repeat same on the other side.
PAGE 2
Step 4: Place 2 barrels into holes found on the C Seat Back. Remove any debris from holes. Step 5: Use 1 PC Lag Bolt (6 x 60 m/m) to attach A Right Armrest into Do not tighten. Repeat same on the other side. 1 PC Barrel C Seat Back. 1 PC Barrel C 1 PC Lag Bolt 1 PC Lag Bolt (6 x 60 m/m) (6 x 60 m/m) D B A Left Right Step 6: Place 4 barrels into holes found under the D Seat. Remove any debris from holes. Step 7: Use 2 PCS of Lag Bolts (6 x 60 m/m) to attach A Right Armrest into D Seat.