Instruction manual

Shinepal Electronics Co., Ltd
www.shinepal.com
2-2-1 N: To Program Password
z To change default password 000000 to preferable code, 111111
Send“000000N111111”SMS to console phone number
Confirmation: user will receive a SMS for confirmation as N: 111111
Password is not necessary if operate or program the system from administrator’s mobile phone; it is mandatory for
other programmed users. Password is located at the front of any command list if programmed user is intending to
operate or program the system.
2-2-2 M: To Program Receiver’s Phone Number
z To program administrator phone number, 0932345678, and user phone number, 0935111111, as receivers.
Send “000000M#0932345678, 0935111111 “SMS to console phone number
Confirmation: user will receive a SMS for confirmation as M #0932345678, 0935111111 to indicate
programming is successful.
z To delete all programmed phone number(s)
Send”000000M “SMS to console phone number
Confirmation: user will receive a SMS for confirmation as M-deleted
If none phone number is programmed as alert receiver, any mobile phone with feature of MMS activated can perform
site supervision, listening in,..etc.
2-2-3 E: To Program Email Address
Email address programming should be performed individually not allowed to combine
with other command in a single SMS.
z To program alert path to designated email address, [e-mail] & [e-mail] from a
user mobile phone.
Send:”[e-mail],[e-mail]” SMS to console phone number
Confirmation: administrator will receive a SMS for confirmation as
E：[e-mail],[e-mail] to indicate programming is successful.
z To Delete Programmed Email Address from user’s mobile phone
Send: “000000E”SMS to console phone number
Confirmation: administrator will receive a SMS for confirmation as
E-deleted to indicate programming is successful.
2-2-4 S: To Siren ON/OFF Switch
z To activate siren and beacon
Send: “000000S1” SMS to console phone number
Confirmation: user will receive a SMS for confirmation as sound open to indicate programming is
successful.
z To Delete siren and beacon
Send: 000000S0 SMS to console phone number
Confirmation: user will receive a SMS for confirmation as sound close to indicate programming is
successful.
2-2-5 H: To Program Emergency Alarm Receiver Phone Number(s)
z To program police station (119) and 0938666666 as emergency alarm receivers,
Send: “000000H119, 0938666666” SMS to console phone number
Confirmation: user will receive a SMS for confirmation as H: 119, 0938666666 to indicate programming is
successful.
Emergency alarm alert would be active only when the receiver(s) is designated.