Owner's Manual

Step 4

Step 3

Hardware Used

M12 Lock Nut 2pcs

Hardware Used

8pcs

M6 Nut

8pcs

Insert the bottom shelf (#12) into the mounted legs. At

tach remaining two legs ("Back Right" (#17) &

“Back Left" (#11) by inserting the hooks of the bottom shelf (#12) into the holes in the legs before bolting

to the cooking chamber (#27) using (8) M6 x 12 bolts (BB) and (8) M6 nuts (FF).

Tighten all leg hardware.

Note: Bottom shelf (#12) must be mounted before securing remaining two legs.

Insert the wheel axle (#10) through the bottom holes in the "Front Left" (#8) and "Back Left" (#11) legs.

Attach the wagon wheels (#9) onto the wheel axle (#10) using (2) M12 lock nuts (GG) as figure shown.

Do not over tighten.

Thread casters (#15) into remaining legs by turning clockwise until tight.

M6 x 12 Bolt

ASSEMBLY INSTRUCTIONS