User's Manual

USER'S MANUAL FOR POCSAG NUMERIC PAGER
1. Self Test
When user puts battery in the battery compartment, Pager starts self-test
with alert tone and vibration.
2. Display Indicators
- Message Protected: Message is saved.
- Service area indicator: Antenna symbol indicates that the pager is within the
service area.
- Duplicated Message: If you receive a page that same page is already
within your beeper, the duplicated message symbol will display.
- Automatic Power On/Off: The pager shuts on and off at the selected time of the
user.
- Alarm: The pager will alert you at the time the user has selected.
- Alert Mode: There are three kinds of alerts.
1) Chirp alert: Short beep tones
2) Audio alert
3) Vibrating alert: Vibration (no alert tone)
- Low battery: It needs replacement if battery level is low
- Message Continuation: When the message is longer than 12 characters the
message continuation symbol is displayed.
3. Function description
① Pager on from the off screen
In the pager off screen, pressing any button more than 2 seconds will turn your
Pager on. A start-up screen is displayed momentarily followed by a short beep
alert. While the pager is on, the standby screen is displayed.
② Turning your Pager Off
a. From the standby screen, press and release the Mode button until
"PAGER OFF” is displayed.
b. Press the Read button to turn the pager off. The off screen will be displayed
without any icons.
③ Receiving and Reading Message