User's Manual
b. Press and release Read button until “MOTOR”is displayed.
c. Press Mode button to activate your selection and return to the standby
screen.
▶ Setting the silent
Follow the vibrator alert-setting instructions to set pager silent.
▶ Setting the alert time
User can set Pager how long it alerts when the message is coming.
a. At the standby screen, press and release Mode button until
"ALERT TIME”is displayed.
b. Press and release Read button until your choice of 8-SEC, 12-SEC, or
4-SEC is displayed.
c. Press Mode button to activate the selection and return to the standby
screen.
⑪ Protecting and Unprotecting messages
You can protect up to 10 messages so they are not erased or replaced by new
messages.
a. To protect messages
While the message is displayed, press Mode button until the lock icon it is
displayed on the screen.
b. To unprotect message:
While the protected message is displayed with lock icon, press Mode button.
The lock icon will disappear.
When you have protected messages 10 messages“LOC FULL”is displayed.
⑫ Erasing message(s)
a. Erasing an Individual Message
▶ From the standby screen, press and release the Mode button until
“Erase?” is displayed.
▶ At this point, Press the read button to select ERASE ONE”then press the
mode button to select the message that is to be erased.
▶ After finding the message to be erased, press the read button. "SURE ?”