User's Manual

will be displayed.
▶ Press the Mode button and then “ERASED”is displayed.
After 4 seconds, you will return the standby screen.
He message selected will be completely erased. All remaining message Will
be moved to the next available message slot.
b. Erasing all message
Follow the erasing individual message instructions and select
“ERASE ALL” instead of “ERASE ONE”
Press Mode button and“SURE”will be displayed.
Press the Read button and “COMPLETED”will be displayed.
All unprotected messages will be erased from memory.
15. Time and date setting
a. From the standby screen, press and release the Mode button until
“SET TIME”is displayed.
b. Press Read button. The month digits will begin to flash.
c. Press and release the Read button to set the month digits.
d. Press Mode button and day digits will begin to flash.
e. Press and release the Read button to set the date digits.
f. Press the Mode button and the hour digits will begin to flash.
Follow the same instructions in step "c" and step "d" to set the hour, minute and A
for AM, P for PM.
16. Setting the alarm
a. To enable the alarm
At the standby screen, press and release Mode button until
“SET ALARM”is displayed.
Press Read button until “ALARM ON”is displayed with icon
Press Mode button and then the hour digit flashes
Follow the time/date-setting instructions on page to set the time for the alarm
to occur.
b. To disable the alarm
Press and release Mode button until “SET ALARM”is displayed.
Press Read button until “ALARM OFF”is displayed.