User's Manual

Press and release Mode button
Then allow the pager to automatically return to the standby screen.
18. Automatic ON/OFF
User can set Pager to turn on or turn off at a selected time of day.
a. To enable automatic on/off
Press and release the mode button“AUTO POWER”is displayed.
Press Read button until “AUTO ON”is displayed with icon picture
Press Mode button and then the hour digit flashes.
Follow the time/date-setting instructions on page to set the on/off time. Press
mode button to set time and hour digit flashes.
Follow the above on time setting instructions.
b. To disable automatic on/off
Press and release Mode button until “AUTO POWER”is displayed.
Press Read button until “AUTO OFF”is displayed.
Press and release Mode button.
Then allow the pager to automatically return to the standby screen.
19. Back –up
All protected messages, time/date, alarm, on/off time and all alerts remained in
memory. When Pager is off and while the battery is being replaced.
Press and release Mode button until “BACK-UP?”is displayed.
Press Read button and then “COMPLETED”is momentarily displayed and return
to the standby screen.
20. BACK LIGHT
In the dark conditions, the backlight makes the screen easy to read.
Press and hold any button over 2 seconds to activate the LCD screen back light.
The backlight remains on for 8 seconds and then returns to the standby screen.
21. Battery information
Pager operates with one AAA-size alkaline battery.
When the battery is low, “LOW BATT”is displayed with icon.
Pager alerts (short beep) 4 times every 5 minutes, prompting user to change the
battery.