User's Manual

1) To enable the alarm
- From the standby screen, press mode button for two seconds to select function
mode.
- Press mode button until "SET ALARM" will be displayed.
- Press read button until "OFF" will be displayed with flash.
- Press mode button and "ON" will be displayed with the symbol.
- At this point, the hour digits will flash after pressing the read button
- Set the time of alarm in the same as that of time setting.
2) Disable to the alarm
- From the standby screen, press mode button until "SET ALARM" will be displayed.
- Press read button and "ON" will be displayed with flash.
- At this point, "OFF" is displayed after pressing mode button and press and release read
button then allow the pager to automatically return to the standby screen.
TIME AND DATE SETTINGTIME AND DATE SETTING
From the standby screen, if press mode button for two seconds it will be
returned to function screen mode.
Press mode button until "SET TIME" is displayed
the month digits begin to flash after pressing read button.
Press mode button to select month and then press read button to activate your
selection and date digits will flash
press mode button to select date and then press read button to activate your selection
and then your digits will be flashed.
follow the same instructions in steps to set the hour and minute
AUTOMATIC ON / OFFAUTOMATIC ON / OFF
This feature allows you turn on and off at a selected time of day.
1) To enable automatic ON / OFF
From the standby screen, press mode button for two seconds to select
function mode.
Press mode button until "SET AUTO" will be displayed
Press read button "OFF" will begin to flash.
Press read button and "ON" is displayed with the symbol screen.
Press read button and then hour digits will flash.
- Please refer to the time / date setting instruction to the "AUTO ON" time.
- If hour digits flash after setting "POWER ON" time follow the automatic ON/OFF
to set "POWER OFF" time in the same way.
2) To disable automatic ON / OFF
- From the standby screen, press mode button until "SET AUTO"
- Press read button and then "ON" will flash.
- Press mode button to set "OFF" and "AUTO ON / OFF" is disabled after
pressing read button.
- Then allow the pager to automatically return to standby screen.
GPS TIME
If select GPS function instead of setting time in itself pager, received time from GPS
will be displayed as present time.