User's Manual

PAGER ON/OFF
1) Self test : The pager is automatically tested with an alert tone and vibration into the
pager
2) Pager ON from the OFF screen
On the pager off screen, pressing read button for more than 2 seconds will turn your
pager on.
3) Turning your pager OFF
- From the standby screen, press mode button for two seconds
- Press mode button until "PAGER OFF" is displayed.
- Press read button and then "SURE" is displayed and press read button again
to turn your pager off.
- Press read button for two seconds and then the standby screen is displayed.
MESSAGES LOCKMESSAGES LOCK
You can protect up to 8 message so that they are not erased or replaced by new
messages without battery after setting the message lock.
1) To protect Messages
- While the message is displayed, press mode button for 2 seconds and then is
displayed "ERASE" on the screen.
- "STORE" is displayed if press mode button again.
- save with read button.
- in case to confirm Protected message you can check if press mode button again
from the standby screen
- If un-saved messages is more than 30 it will automatically replaced new message
in order.
2) Erasing protected messages
- If press mode button while confirming Lock message for two seconds "ERASE" is
displayed
- Erase with read button.
BACK LIGHT
In low light-condition, the back light makes the LCD easy to read
- Press and hold any button for over 2 seconds to activate light.
- Continue for 12 seconds.
BATTERY INFORMATION
This battery uses AAA-size alkaline batteries. when the battery is low,
"LOW BATT" is displayed with the symbol.
Notifying you that the battery is in need of being replaced.