User Manual

48
Vibrating Alert Setting (MENU 6-7)
If the optional vibrating battery is installed, you can switch the
vibrating alert on/off. This sub-item is not displayed if the regular
battery is installed.
If the vibrating alert is turned on then the alert for incoming calls
works as follows:
• If no ring tone is selected or the volume is turned off, the phone
will vibrate and pause in a continuous cycle.
Tip:
- When Vibrating alert is On, when the power is switched on,
the phone vibrates.
Quiet Mode
Your phone’s quiet mode is toggled on or off by pressing and
holding down CLEAR at the standby mode. An icon is shown in the
screen when quiet mode is enabled.
When switching to quiet mode the vibrator (if fitted) will give a
short burst to indicate this. When exiting quiet mode the phone will
emit a short beep.
When running in quiet mode all audio actions are silenced, except
for DTMF tones and call progress tones when in call. If your phone
has a vibration motor then this is used when alerting to incoming
calls, temporarily overriding any audio/vibrator alert settings.
11. Audio Settings
CEL GDU325 (p.41-59) Eng.pm6 8/2/01, 10:20 AM48